Ngokuthuthukiswa ngokuthiwa kwezinhlelo, sathi sikhuthaza ithalente lethu ukuze sibonise wonke umfazi ngezinto ezinhle, sikhona sibambisane naye ukuthi abe nomuzwa wakhe wokukhanya okwesifazane futhi abe nomthelela.

Uhlelo Lokusebenza Kwecompany

Isithunzi sokwenza okwezwe: kuyindlela esiza ekwenzeni ukuthuthukiswa okuphelele kwesakhiwo sethu

Ukuphila nokunyelela: kuyindlela yokwenza okuphelele kwezithelo ezihlala ezimhlophe

Ukuvamile nokwenza izinto ezibalulekile: Kuyindlela yokuthi kufanele sibonakale kwihambo yezomnotho futhi sibone imiphumela yezikhwama

Ukusebenza ngokuhlanganyela: Kufanele kube lapho sikhoyo: Kufanele kube lapho sikhoyo indawo yokusebenza enhle

Kwenzekani ekuphileni: Kufanele kube nemiphumela enhle yokusebenza kufanele sibhekane nemigomo yethu futhi sikhula nokwakha

Le ndlela iyindlela ekwaziyo ukugcina kanye nokuthuthukisa izinto ezithunyelwe ekhaya kwe-assembly, futhi iyathuthukisa ukwenza izinto. Lokhu kwenza kufanele kube nokwazi kwezinto ezahlukene zezinto, isikhathi sokwenza konke okukhona, nokuhlanganisa okwengeziwe kwezinto. Futhi emva kokwenza, le ndlela yonke iyathunyelwa ngaphansi kwesitoreji ukuze kwenziwe ukuphakamisa

Emva kokuphinda kwamapulatifomu okwenzelwe, isisebenzi sivuliwe ekupheleni kwezinto, futhi isisebenzi esivuliwe kuyoba kwenziwe ngokuphelele,

Isilinganiso somthamo we-film yokucoca etholakalayo ekupheleni kwezinto okwenzelwe ngalesi sisebenzi kungaba phakathi kwama-60-200UM, okwenza kube kwenziwe kwezinto ezahlukene

The purpose of pre-treatment equipment is to clean the oil stains and particles on the surface of the workpiece/product through physical and chemical methods, and to form an oxide film according to the surface requirements of the workpiece after cleaning, increasing its ability to oxidize, corrode, salt spray, and form a hundred grids. It also provides decorative surface spraying for the workpiece/surface in the later stage to form a better adhesion rate,

There are many types of pre-treatment equipment, which can be divided into manual, gantry, conveyor spray, and a combination of conveyor spray and soaking according to product requirements. They each have their own advantages and disadvantages

Manual mode is suitable for a wide variety of products with different sizes and relatively low investment costs;

Longmen style is suitable for a wide variety of products, large and small, but requires fully automated production. It is a processing method that does not require manual intervention except for loading and unloading, and is suitable for the automation connection of various process stages;

The conveyor spray type is suitable for products with a relatively simple structure, no excessive dead corners, and large batch sizes. It can achieve automated processes from pre-treatment to finished product discharge after painting/powder coating;

The combination of conveying, spraying, and soaking is suitable for products that are relatively complex and have some dead corners. It can be soaked in a tank and treated with an ultrasonic treatment device at the dead corner workstation of the workpiece. After treatment, it can achieve automation from pre-treatment to finished product discharge after painting/powder spraying